Honed exposed-aggregate deck with a step and a glass pool fence, palm shadows across it

Honed Concrete

Honed Concrete is specifically designed as a seamless flooring option for outdoor living areas, pool surrounds, patios, footpaths and driveways. It's high slip resistance properties can achieve up to a P5 slip rating in wet areas.

  • Fully Qualified and Insured
  • QBCC Licence No. 15435907
  • Residential & Commercial
  • New & Existing Floors

Get a free quote

Fill in the form below or call us now to organise a quote

Call 0437 396 651

BrisbaneMoreton BaySunshine CoastFraser CoastToowoombaIpswichWide Bay & South Burnett

Products and Services

Honed Concrete

The process involves grinding the concrete to the client's desired level of stone exposure. This creates a flat textured surface that is sealed with a matte penetrating sealer with a non slip additive that leaves a comfortable surface under barefoot while maintaining high slip resistance.

Where possible we like to organise a free on site meeting to get a clear understanding of what your specific aesthetic preferences are, how the space will be used, measure the area and discuss any relevant information. This helps us supply an accurate quote and empowers you with as much information as possible for you to make an informed decision on your flooring investment.

Honed exposed-aggregate patio and steps in dappled shade outside a brick house

Customising your floor

Stone Exposure

Honed Concrete allows the client to choose either Minimum or Full Stone Exposure.

Minimum or Partial Aggregate Exposure

The floor is given a light grind removing approximately 1mm-3mm of the concrete surface depending on the individual slab characteristics. This results in a variable amount of stone exposure across the floor from areas with no stone showing at all to light salt and pepper in some areas and even some areas with full stone exposure. The level of aggregate exposure across the floor is influenced by a number of factors including; flatness of the slab, the hardness and porosity of the slab, and where the aggregate physically sits within the layers of the concrete.

The finish results in a more natural look that shows the unique character of the specific floor while maintaining a minimalistic aesthetic.

Full Stone Exposure

A very aggressive diamond grind is performed removing as much as 3mm-5mm in a single grinding pass. This reveals a very consistent amount of aggregate exposure across the entire floor area.

The same corner with the tiles gone and the slab honed, fine stones showing
A patio corner in sand-coloured tiles, leaves scattered across it, sliding doors on two sides
Before After

How it's done

Honed Process

  1. Completion of a site visit to gather details about the concrete slab, your requirements and expectations and to measure the area.

  2. An in depth quote is provided detailing every step we propose to perform on your floor to achieve the desired outcome. Our quotes are usually very accurate and not likely to change unless you request a variation. The accompanying quote also includes some important information including our Pre Commencement Details, Terms and Conditions and some photos of similar jobs we have recently completed.

  3. After accepting the quote we will work with you through the booking process and lock in a date to start working on your floor.

  4. Our punctual tradespeople will arrive on site as arranged and get straight to work. If there is existing flooring such as tiles, timber etc this is removed before we start grinding the floor to your chosen exposure level.

  5. Once the floor is prepared, we begin applying the sealer to the floor. Depending on your specific slab we may be able to apply multiple coats on the same day, or we might have to allow the sealer to cure over night before applying subsequent coats.

Credentials & quality

Qualified, insured,
bespoke.

At Polished Living, our experienced and qualified tradespeople deliver bespoke decorative concrete floor finishing, customised to each client's specific slab and requirements. As a professional trade services company we are fully registered, licenced and insured with a commitment to providing clients with quality service and high end floors that stand the test of time.

  • Fully Qualified and Insured
  • QBCC Licence No. 15435907
  • ABN 93 669 643 038
  • Committed to ongoing professional development
Master Builders member Master Builders
member

Where we work

Coast to country.

Residential Homes
Commercial Floors
Patios, Paths & Outdoors
Garages, Driveways & Sheds

Ready to transform your floor?

Call us today

0437 396 651
Ready to transform your floor?

Call us today

Call 0437 396 651